国产又粗又猛又,爽-丰满人妻熟妇av一区二区-久久色综合88-久久亚洲一区二区三区舞蹈-麻豆国产精品一二三-精品av_区二区三区-亚洲啊啊啊在线观看-日韩人妻一区二区三区av-337p大胆噜噜噜噜噜91av,亚洲精品综合色av,熟妇高潮一区二区在线播放,国产18禁福利视频

產品展示
首頁 > 產品展示 > > 其他檢測儀器 > TC-500 氧氮聯合測定儀

TC-500 氧氮聯合測定儀

簡要描述：簡單說明：TC500系列儀器質量、性能、工藝滿足您對金屬、難熔物、其他無機材料日常生產中氮/氧分析的需要

  • 產品型號：TC-500
  • 廠商性質：生產廠家
  • 更新時間：2025-07-17
  • 訪  問  量：2786
詳情介紹

詳細說明:

TC500系列儀器質量、性能、工藝滿足您對金屬、難熔物、其他無機材料日常生產中氮/氧分析的需要

Determination of Oxygen and Nitrogen in
Reactive/Refractory Metals and Their Alloys*
 
Approval
ASTM E-1409 Oxygen Determination in Titanium and Titanium Alloys
ASTM E-1569 Oxygen Determination in Tantalum
ASTM E-1937 Nitrogen Determination in Titanium and Titanium Alloys
 
Sample Preparation
A clean representative sample is required in order to obtain optimum results. Solid samples can be leached in suitable acid or abraded with a clean file, rinsed in acetone, and dried with warm air. Refer to ASTM methods above for further details.
 
Accessories
782-720 Crucible; 782-721 Electrode Tip; 502-344 UHP Nickel
Baskets; 501-073 Graphite; 503-032 Glass Accelerator Scoop;
501-059 Tin Capsules—for powdered samples. （Additional steps required for powdered samples are noted in parenthesis.）
 
Calibration Standard
LECO 501-320 Titanium Pin, 502-047 Zirconium Pin, NIST, or other suitable reactive/refractory metal standard.
 
Method Parameters
Analysis Parameters
Outgas Cycles                           2
Analysis Delay （seconds）             20
Analysis Comparator                 1
Analysis Type                              Auto
 
Element Parameters                  Oxygen           Nitrogen
Minimum Time （seconds）
35
55
Integration Delay （seconds）
5
15
Comparator Level （%）
1
1
 
Furnace Parameters
Furnace Control Mode             Power
Purge Time （seconds）                    15
Outgas Time （seconds）                20
Cool Time （seconds）                    5
Outgas Power （Watts）                 6300
Analyze Power （Watts）                5300
 
 
 
 
 


 

*This includes Ti, Zr, W, Mo, Ta, Nb, Hf, and their alloys.

 
TC500


 

 
Typical Results
 
 
 
Titanium Pin
Mass （g）
Oxygen （%）
Nitrogen （%）
 
0.1135
0.1808
0.0189
 
0.1133
0.1843
0.0194
 
0.1134
0.1831
0.0184
 
0.1138
0.1819
0.0188
 
0.1133
0.1821
0.0195
 
0.1131
0.1829
0.0185
 
0.1134
0.1833
0.0191
 
0.1143
0.1849
0.0194
 
0.1125
0.1837
0.0189
 
0.1072
0.1830
0.0191
 
Average
0.1830
0.0190
 
Std. Dev.
0.0012
0.0004
 
Zirconium Wire
 
Mass （g）
 
Oxygen （%）
 
Nitrogen （%）
 
0.1067
0.1246
0.0017
 
0.0978
0.1273
0.0017
 
0.1180
0.1246
0.0019
 
0.1097
0.1235
0.0014
 
0.1141
0.1272
0.0017
 
0.1017
0.1226
0.0018
 
0.1140
0.1269
0.0020
 
0.0987
0.1239
0.0020
 
0.1015
0.1233
0.0022
 
0.1197
0.1270
0.0020
 
Average
0.1251
0.0018
 
Std. Dev.
0.0018
0.0002
 
Procedure
 
 
 
1.   Determine the blank as follows:
a.   Enter the "blank" ID code with a 1.0000 g weight in the weight stack.
b.   Press the loader control switch, the sample loader will open.
c.   Place one 502-344 UHP Nickel basket into the loading head using clean tweezers.
（Place a 501-059 Tin capsule into the Nickel basket before placing it in the loading head.）
d.   Press the loader control switch, the sample loader will close and seal and the furnace electrode will open.
e.   Remove crucible from electrode tip and discard.  Clean furnace area using the appropriate brushes.  Vacuum away loose dust.
f.    Place ~0.05 g 501-073 into the bottom of a 782-720 crucible.  ~0.05 g is approximay a ¼ full
503-032 glass accelerator scoop.
g.   Place the crucible on the lower electrode.
h.   Press the loader control switch, the furnace electrode will close and the analysis sequence will start automatically.
i.    Repeat steps 1a through 1h at least four more times.
j.    Enter blank following routine outlined in operator's instruction manual.
2.   Calibrate the instrument as follows:
a.   Weigh the calibration sample. （Weigh the calibration sample into the tin capsule.）
b.   Enter the calibration sample ID code and sample weight in the weight stack.
c.   Place the calibration sample （capsule） into a nickel basket.
d.   Press the loader control switch, the sample loader will open.
e.   Carefully place the calibration sample/nickel basket （capsule） into the loading head using clean tweezers.  Make sure that the calibration sample （capsule） stays in the basket and the basket
stays upright.
f.    Press the loader control switch, the sample loader will close and seal and the furnace electrode will open.
continued on page 3


 

Procedure （continued from page 2）
g.   Remove crucible from electrode tip and discard.  Clean furnace area using the appropriate brushes.  Vacuum away loose dust.
h.   Place ~0.05 g graphite into the bottom of a crucible.
i.    Place the crucible on the lower electrode.
j.    Press the loader control switch, the furnace electrode will close and the analysis sequence will start automatically.
k.   Repeat steps 2a through 2j a minimum of three times.
l.    Complete a calibration by following the auto calibration procedure as outlined in the operator's instruction manual.
m.  Verify the calibration by analyzing the calibration sample again.  It should fall within the expected tolerances.  If not, repeat steps 2a through 2l again.
3.   Analyze the samples as follows:
a.   Weigh ~0.1 g sample. （Weigh the sample into the tin capsule.）
b.   Enter the sample ID code and sample weight in the weight stack.
c.   Place the sample （capsule） into a nickel basket.
d.   Press the loader control switch, the sample loader will open.
e.   Carefully place the sample/nickel basket （capsule） into the loading head using clean tweezers.
Make sure that the sample （capsule） stays in the basket and the basket stays upright.
f.    Press the loader control switch, the sample loader will close and seal and the furnace electrode will open.
g.   Remove crucible from electrode tip and discard.  Clean furnace area using the appropriate brushes.  Vacuum away loose dust.
h.   Place ~0.05 g graphite into the bottom of a crucible.
i.    Place the crucible on the lower electrode.
j.    Press the loader control switch, the furnace electrode will close and the analysis sequence will start automatically.
 
Theory of Operation
The TC500 is a microprocessor-based, software-controlled instrument that measures both nitrogen and oxygen in a wide variety of metals, refractories, and inorganic materials. The inert gas fusion principle is employed. A weighed sample, placed in a high-purity graphite crucible, is fused under a flowing helium gas stream at temperatures sufficient to release oxygen, nitrogen, and hydrogen. The oxygen in the
sample, combines with the carbon from the crucible to form carbon monoxide. The nitrogen present in
the sample releases as molecular nitrogen, and any hydrogen present is released as hydrogen gas. The helium carries the sample gases through heated rare earth copper oxide which converts carbon
monoxide to carbon dioxide （CO2） and hydrogen to water （H2O）. The nitrogen passes through
unchanged. The gases are then passed through a CO2  infrared （IR） cell where the oxygen is measured as
CO2. CO2  and H2O are then removed by a Lecosorb/Anhydrone trap, while the nitrogen passes through
to a thermal conductivity （TC） cell for determination.


 

TC500 Flow Diagram
 
 
 
 
 

留言框

  • 產品：

  • 您的單位：

  • 您的姓名：

  • 聯系電話：

  • 常用郵箱：

  • 省份：

  • 詳細地址：

  • 補充說明：

  • 驗證碼：

    請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7

技術支持：化工儀器網   sitemap.xml   管理登陸
©2026 版權所有：寧波市鄞州瑾瑞儀器設備有限公司   備案號：浙ICP備14028217號-3

浙公網安備33020402000311號
国产精品国产成人三级-亚洲精品乱码久久久久久黑人-97超碰亚洲人妻诱惑-天天日天天日天天天日 | 亚洲欧美综合777-国产成人精品av久久-91大神精品视频在线播放-国产av日韩最新1区2区3区 | 成人h动漫精品一区二区三区-91精品一区二区三区综合在线爱-伊人久久久久五月天-色综合久久之分久久 | 久久97视频免费观看-亚洲男人的天堂在线-av天堂加勒比系列-91福利地区在线观看 | 婷婷av国产精品推荐-亚洲欧美精品卡一卡二-久久久99人妻一区二区三-91人妻精品国产综合久 | 日韩欧美国产在线免费观看-国产精品高潮呻吟久久av有码-99日视频在线播放-久久综合久久综合大香蕉 | 欧美中文字幕视频-精品人妻一区二区三区人妻斩-蜜臀a v在线一区二区-国产又粗又黄 又爽又硬视频 精品人妻少妇一区二区三区四区-超碰国产原创在线观看-91中文字幕亚洲精品乱码在线-久久国产高清字幕中文 | 超碰人妻黑人中文版-18岁成年人黄色片-日韩在线一区第一页-91精品国产高清久久久久久久久 | 日韩激情欧美激情-国产 日韩 欧美 综合-激情五月天最新视频网址-欧美精选一区二区三区四区 | 国产成人啪精品视频免费网站下载-91精品少妇高潮一区-中文字幕人妻一区二区三区在线-久久精品国产亚洲av桃花av | 精品伦精品区一区二区三-91蜜桃精品久久-五十路丰满人妻熟女中文字幕-成年av毛片在线观看免费 | 日韩av中文一区二区三区-美女一区在线视频-黑人性视频多人欧美-精品人妻一区二区三区含 | 国产精品久久久久精品香蕉剃毛-五月天丁香花婷婷亚洲-福利一区二区三区高清视频-色呦呦网站精品国产 | 狠狠操天天操天天干-国产激情一区二区三区四区-中文字幕婷婷中出-日韩av最新在线免费观看 | 中文字幕日韩久久-久久思思青青热一下精品-91人妻精品久久久久电影-久久草热视频免费观看| 91久久国产口精品久久久久-亚洲精品少妇视频在线观看-老司机午夜九色网-91成人在线观看喷潮蘑菇老公 | 在线视频 国产 日韩 欧美-久久精品 中文字幕-欧美 日韩 激情 最新-日韩一区二区三区北条麻妃 | 亚洲天堂中文字幕悠悠-久久夜久久久久-久久久久亚洲av毛片大全有-日韩欧美国产免费大片 | www国产精品久久久久久-国产乱子伦一区二区三在线-日韩精品欧美高清-嫩草伊人久久精品少妇蜜桃av | 日韩欧美亚洲欧美亚洲欧美-国产中文字幕视频免费在线观看-欧美日韩国产亚洲图片成人网-日韩人妻一区,二区,三区 | 欧美激情另类综合-成人97在线观看视频-日韩欧美国产综合网-婷婷国产五月天免费视频久久 | 黄色亚洲日午夜在线-日韩一区二区三区水蜜桃-久久99热只有频精品8国语-91成人国产视频在线观看 | 懂色av一区二区三区高清-国产又粗又长又大免费视频-超碰在线公开免费97-日韩熟女精品91中文字幕 日韩欧美一级片一区二区-极品一区二区视频在线观看-成人欧美日韩一区二区-丁香丝袜激情妞 | 免费91精品国产自产在线观看-91麻豆精品国产自产观看在线-丰满少妇人妻久久久久久-中文字幕熟女人妻网站 | 91人妻一区二区三区在线-2019最好看的中文字幕视频-亚洲最大成人久久天堂综合网-欧美日韩人妻中文字幕懂色 | 日韩未删减版电影-天天爽天天日天天摸-久久精品久久精品久-成人精品网站在线观看 | 青草青草2在线视频免费观看-欧洲一区二区三区在线视频-久热手机在线视频亚洲-精品人妻中文字幕在线观看 | 在线日韩亚洲欧美-国产一区二区不卡视频在线观看-日本中文字幕观看地址-久久婷婷色视频 | 日韩精品激情在线-少妇高潮一区二区三区21p-精品视频免费观看婷婷-欧美日韩久久精品久久精品久久 | 97超碰精品视频在线观看-国产欧美日韩中文字幕-久久精品国产99精品最新版-日韩一区熟女av发布 | 久久视频免费精品视频免费-国产又大大紧一区二区三区-五月激情啪啪啪综合网-91人妻丝袜一区二区 国产精品日韩av在线观看-久久精品高潮999久久久-x88av熟女人妻-日韩 视频一区视频 二区 | 国产精品久久久久久久18禁-日韩 欧美 精品 国产-1区和2区3区免费视频-亚洲精品视频在线观看在线观看在线观看 | 中文字幕日韩一般男女在线播放-亚洲精品视频久久99-欧美人妻少妇一区二区三区四区-国内在线免费小视频 | 亚洲国产欧美日韩另类欧美日韩精品-国产成人一区二区91-91人久久在线视频-国产精品久久久久久久久久久久午 | 九九热久久久99国产盗摄蜜臀-91精品一区二区一-超碰人妻福利社-日本久久久夜夜 | 97久久精品人人澡人人爽-91精品视频在线看-久久这里只精品蜜臀av-国产亚洲欧美在线观看视频 | 日本中文字幕少妇视频-亚洲综合色噜噜狠狠网站高清-看日韩毛片av-久久人妻少妇嫩草av蜜桃综合 | 日韩午夜av网站-久久视频老女人-91精品国产免费久久综合-欧美久久老太婆逼逼 | 亚洲一区二区三区乱码av-日韩在线午夜美女精品视频-亚洲欧美丝袜另类视频-超碰在线观看免费国产 最新国产精品精品视频 视频-五月天中文字幕av在线播放-成人人妻av999-超碰人人爱人看人人能97 | 国产亚洲3p一区二区三区-激情综合网,激情五月天四射-大香蕉久久久久在线伊人-巨乳姐姐诱惑中文字幕 | 午夜激情网在线观看-黑人高清视频在线观看-国产精品成人自拍偷拍-国产一区二区三区四区五区六区 999久久九九精品-中文日韩免费码中文在线观看-色一区二区三区欧美-激情五月网婷婷 |